If you own a Canon printer, and in this article, look for the opportunities you have the "Waste Ink absorber is full" error, or something similar, and have no idea what it is or what you expect the printer to do. Unfortunately or fortunately, you're not the only one with this problem and there are ways to solve it. If you call Canon support, they will immediately tell the printer to get to maintenance, this does not help, but if you continue with a report or to pressure of overtomorrow.
First, it would important to note that the waste ink absorber a small pad that sits under the cartridge's "Home" position and collect all the loose ink, available on the cartridge is. This will prevent streaks, it is to have a good thing. Many inkjet printers they have, but as far as I know only display Canon PIXMA printer an error when suggesting a certain internal counter that the ink absorber may be full. If you have done a lot of pressure, the ink absorber can actuallyfull and you have to have them cleaned or replaced to ensure the best print quality. However, if you still do not print that much or have you and you only need to print something in this moment, there is a way to reset the counter and stop the errors are not displayed again. Until the counter a certain unknown point, that is, in this case, you'll have to repeat the process.
Unfortunately, the instructions are different for resetting the counter from printer to printer and again asAs far as I can tell, are not mentioned in the manual. People were able to figure out how to do it, however, and it gives instructions for many printers online. Search for your printer model and either "ink absorber" or "used ink tank" should provide you with out a few links to check. Almost all of them are fairly easy to follow, albeit artificially, and not so easy to detect on your own. Once the meter has been reset, it should be possible to print again.
When the ink absorber pad in yourWhile Canon is full, you might want to replace it. After it is usually not a good choice waited because it probably costs almost as much as the original cost of the printer and not covered by the warranty, since this as normal wear and tear and not a defect. Canon, however, sell a new ink absorber not too hard to replace. The number to call, in the United States is 732-521-7230, which is its Parts Center in New Jersey. They are open from Monday to Friday,EST 9.00 bis 8.00 clock and should be able to sell you a replacement. You can also try the ink absorber on your Canon clean without replacement with tissue, the amount of ink from the absorber can absorb as you.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น