Heat exchanger tube cleaning and general maintenance is a necessary part of keeping a system in good condition. Heat exchangers are available in a variety of industries, particularly in the oil refining and chemical industries. Their function is to transfer heat from one source to another, usually from a liquid in another liquid. Water-blasting is used, the most common method for cleaning heat exchanger tube. This means ultra-high pressure water jets will be focused on the scale,In order to remove it. Automated systems can carry water blasting "remote", and thus the maximum safety for operators.
The two liquids are normally not in contact with each other but have a wall with high thermal conductivity between them. In the oil industry is the most common form of the heat exchanger is the shell and tube design. This construction leads to a large round metal tube construction, the hull, which has a bundle of tubes contained within.
The heat exchange takes place when aFluid introduced into the shell and another is introduced into the pipes. The two fluids are exchanged at different temperatures and heat between them, usually for the purpose of cooling one of the fluids down.
The tubular design of the heat exchanger is a complex issue. Cleaning it can be a daunting task, but it's actually easier to achieve than one might imagine. Heat exchanger tube cleaning is necessary for several reasons. It is necessary, for example, before aInspection of a heat exchanger tube bundle, especially if the tube bundle is made of metal.
An inspection of a tube bundle will be implemented through the use of an internal rotary inspection system. This includes the introduction of a probe, a rotating mirror, an ultrasonic beam can be directly on the wall of the tubes to measure all of pitting or corrosion. The mirror is rotated by a small turbine, which is driven by the pressure of the water that is introduced into the pipes. The probe is drawn along theTube is slow on a continuous recording of the table inner state of the tube.
During normal operation, the inside of the tube bundle may be poorly scaled. This has a dramatic impact on the efficiency of the device, significantly reducing its ability to function at maximum capacity. For this reason, it is then held for pipe cleaning to bring the device back to default.
Water-blasting is used, the most common method for cleaning heat exchanger tube. Thisbrings ultra-high pressure water jets will be to the extent directed to remove it. Automated systems can carry water blasting "remote", and thus the maximum safety for operators.
De-scale cleaning operations are usually carried out locally, which means that do not have the heat exchangers and tube bundles are removed. This helps to ensure a minimum of time is spent, if the heat exchanger can not be used.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น